Isuzu motorliste

Isuzu har bygget egne motorer, og har samarbeidet med General Motors, og bygget motorer designet av GM på lisens. Isuzu har også bygget motorer for General Motors, Honda, Toyota og Mazda.

To sylindre

Diesel

Modell	Beskrivelse	Boring (mm)	Slag (mm)	Volum	Effekt	Produksjonsår	Vekt tørr
2AA1	There is also a three-cylinder version called the 3AA1. The Bosch PES-K,fuel pump is shared with the 2AB1, and is similar to the PES-A used on,the 3AA1, 3AB1, C220, and C240 engines.	86	84 mm	975 cc	19.5 PS (14.3 kW) @2800rpm	1972-1989	160 kg
2AB1	There is also a three-cylinder version called the 3AB1.	86	106	1184	25.5 PS (18.8 kW) @2800rpm	1970-1991	160 kg
UM-2AB1	A marinised version of the 2AB1	86	106	1184		1971-1991
2CA1	A marinised version is produced by Klaasen Engines the Suzie 14	74	76	653		1983
2KC1		74	76	653		1988-1994
UM-2KC1	A marinised version of the 2KC1. Also marinised briefly by Beta Marine Limited.	74	76	653

Tre sylindre

Diesel

A Engines

Modell	Beskrivelse	Boring (mm)	Slag (mm)	Slagvolum	Ytelse	Byggeår	Vekt tørr
3AA1	This engine shares the bore and stroke of the C190 four-cylinder diesel and 2AA1 two-cylinder. The Bosch PES-A fuel pump is the same as the one used on the 3AA1, 3AB1, C220, and C240 engines.	86	84	1,463 cc	29.5 PS (21.7 kW) @2800rpm	1972-90	197 kg .
3AB1	C240, but with a much longer stroke. There is also a two-cylinder version called the 2AB1.	86	102		38 PS (28 kW) @2800rpm	1971-	217 kg .
3AD1						1977-90
3AD1-T						1978-79

L Engines

Designation	Description	Bore	Stroke	Displacement	Power Rating	Production Run	Dry Weight
3LA1
3LB1	OHV
3LD1	OHV
3LD1	OHV

Fire sylindre

Petrol

GH engine

Isuzu's first petrol engines were license built Hillman units for the locally assembled Minx, from 1953. Called the GH10 it has a bore of |65|mm|in|2 and a stroke of 95|mm|in|2 for a displacement of 1260 . Power is 37.5 PS. In 1955 this was updated to the GH12, a square design with a 76.2 mm bore and stroke for a displacement of 1390|cc|cuin|1. This was upgraded in 1956 for more power, 46|PS|kW|0 rather than the original's 43 PS, and was renamed GH100. In 1958, power increased yet again, to 50 PS|.

GL engine

For 1959 Isuzu developed their own square design 78 mm) called the GL150, Isuzu's first own petrol engine. Still showing unmistakable Hillman origins it displaces 1491 cc and has 60 PS . The GL150 was fitted to the 1959 Isuzu Elf and the 1961 Bellel.

General Motors

• The Isuzu Hombre used a General Motors-built Vortec 2200 Engine with 118 hp (86 kW) and 140 ft·lb (190 N·m) of torque.
• 2004–2006 Isuzu i-Series used a General Motors-built Vortec 2800 Engine with 175 hp (130 kW) and 185 ft·lb (251 N·m) of torque.
• 2007–2008 Isuzu i-Series use a General Motors-built Vortec 2900 Engine with 185 hp (138 kW) and 195 ft·lb (263 N·m) of torque.

Isuzu G engine

Designation	Description	Bore	Stroke	Displacement	Power Rating	Valvetrain
G130	This engine was used in the Isuzu Bellett, Bellett B, and Bellett Express.	75 mm (3.0 in)	75 mm (3.0 in)	1,325 cc (80.9 cu in)	58 PS (43 kW)	OHV
G140	The 1.4 L G140 engine was used in the Chevrolet Chevette in North America. The engine block and associated components for the USA market Isuzu G-series engines were locally produced under license by a GM engine casting and assembly plant in Flint, Michigan. In South America an overhead-cam version was adapted, and later developed into a 1599 cc version.	82 mm (3.2 in)	66.2 mm (2.61 in)	1,398 cc (85.3 cu in)		OHV
G150	The 1.5 L G150 engine was used in the Isuzu Bellett.	79 mm (3.1 in)	75 mm (3.0 in)	1,471 cc (89.8 cu in)		OHV
G160/G161	The eight-valve 1.6 L G160/G161 engine was used in the Isuzu Florian and the Isuzu Bellett GT, as well as a number of commercial vehicles including the Elf 150 (KA41/51). There is also an SOHC version of this called the G161S/G161Z, which was used in the Florian, the Isuzu Gemini, Holden Gemini and Chevrolet Chevette. Later, this became renamed the 4ZA1. A further development was the twin-cam G161W engine (still with eight valves) first presented in the Isuzu BellettGT-R in March 1968.	82 mm (3.2 in)	75 mm (3.0 in)	1,584 cc (96.7 cu in)		OHV
G180	The 1.8 L G180SS engine was used in the Isuzu Bellett GT. The 1.8 L G180Z SOHC engine was used in the 1972–1976 Opel Kadett, Isuzu Gemini, Chevrolet LUV, and Isuzu 117 Coupé. There is also the G180W DOHC eight valve engine which was used in the Gemini ZZ (Japan only) and the Isuzu 117 Coupé.	84 mm (3.3 in)	82 mm (3.2 in)	1,871 cc (114.2 cu in)	78–80 hp (79–81 PS) @4800rpm 95 lb⋅ft (129 N⋅m) @3000rpm	SOHC
G200	The 2.0 L G200Z engine was used in the 1981–1985 Chevrolet LUV and also Isuzu Trooper (Holden Jackaroo in Australia). With carburettor it has 86 hp, with EFI in the Isuzu Piazza 90 hp in the US and 110 hp in Japan. The G200WDOHC eight valve engine was found in the 19??-1985 JDM, Isuzu 117 Coupé & early Isuzu Piazza with 135 hp (101 kW) and 123 lb·ft (167 N·m) of torque. It was also installed in 1982–1985 GMC S-15 pickup trucks, where it received the LR1 engine code. Unlike the 1.4 which was locally produced, the G200 was imported (it was also used with the second generation LUV and Isuzu P'UP) until GM discontinued it as the entry level powerplant when the Iron Duke was made the base motor after 1985; some early S10/S15s came with the optional GM 122 motor shared with its J-platform compacts since it was locally produced.	87 mm (3.4 in)	82 mm (3.2 in)	1,949 cc (118.9 cu in)		SOHC
G201	This 2-liter inline-four is a gasoline-powered version of the diesel C190. It has a 8.0 : 1 compression ratio. It was fitted to certain models of the Isuzu Elf 250 (TLG42).	86	84	1951	kW|0 @4800rpm 16.0kgm @3000rpm	SOHC

Isuzu X engine

Designation	Description	Bore	Stroke	Displacement	Power Rating	Valvetrain
4XB1	The 1.3 L 4XB1 engine was available in export market Isuzu Gemini JT140s.	72.3 mm (2.85 in)	79 mm (3.1 in)	1,297 cc (79.1 cu in)	72 PS (53 kW)DIN @5400rpm	SOHC
4XC1	The 1.5 L 4XC1 SOHC engine was the base engine for the Isuzu Gemini FF, the JT22 series Isuzu Piazza, and its Chevrolet Spectrum derivatives. Power ranged from 70 hp (52 kW) in US-spec versions via 76 PS (56 kW) in the non-catalyzed European models, to a turbocharged version with 120 PS (88 kW) (down to 110 hp SAE in the US). Later versions received a twelve-valve head, as installed in the JT150 Gemini it offered 100 PS (74 kW) at 6,000 rpm.	77 mm (3.0 in)	79 mm (3.1 in)	1,471 cc (89.8 cu in)		SOHC
4XE1-V	The 1.6L 4XE1-V engine was used in the base model Geo Storm and the base model Isuzu Stylus S.	80 mm (3.1 in)	79 mm (3.1 in)	1,588 cc (96.9 cu in)	96 PS (71 kW)	SOHC
4XE1-UW	The 1.6L 4XE1-UW engine was used in the 1990-1991 Isuzu Impulse XS, in the 1990-1991 Isuzu Stylus XS, in the 1990-1991 Geo Storm GSi, and the M100 Lotus Elan.	80 mm (3.1 in)	79 mm (3.1 in)	1,588 cc (96.9 cu in)	130 hp (130 PS) 140 PS (103 kW) in Japanese spec.	16 Valve DOHC
4XE1W	The 1.6L 4XE1W turbocharged engine was used in the M100 Lotus Elan, the Isuzu Impulse RS, and the 1991 Isuzu Stylus RS as well as the JDM Gemini sedan.	80 mm	79 mm	1,588 cc (96.9 cu in)	160 hp (160 PS) 180 PS (132 kW) in Japanese spec.
4XF1	The larger 1.8L 4XF1 replaced the 4XE1 in North America. This engine was used in the 1992-1993 Geo Storm GSi, in the 1992 Isuzu Stylus RS, and in the Asüna Sunfire. In Japan it was installed in the Isuzu Piazza, where it had 150 PS (110 kW).	80 mm	90 mm	1,809 cc (110.4 cu in)	140 hp (140 PS) 125 lb⋅ft (169 N⋅m)	DOHC

Isuzu Z engine

Designation	Description	Bore	Stroke	Displacement	Power Rating	Valvetrain
4ZA1	The 1.6L 4ZA1 engine is based on the earlier G161 engine.	82 mm	75 mm	1,584 cc		SOHC
4ZB1	The 1.8L 4ZB1 engine was used in the 1981 to 1985 Isuzu Fargo. It was a development of the earlier G180 engine. It has also been built by Hindustan Motors in India since the 1990s, replacing the G180Z there.	84 mm	82 m	1,817 cc	88 PS (65 kW)	8 Valve SOHC
4ZC1	The 2.0L 4ZC1 engine was used in the Isuzu Fargo van from 1986 onward, where it produced 94 PS (69 kW). This was also used in the Isuzu Aska, where it produced 110 PS (81 kW) (JIS). The export version claimed 100 PS (74 kW). A 150 PS (110 kW) turbo version (4ZC1-T) could be found in the Isuzu Piazza & Isuzu Aska.	88 mm	82 mm	1,994 cc		8 Valve SOHC
4ZD1	The 2.3L 4ZD1 could be found in the Pickup, the MU/Wizard/Rodeo/Amigo, and the Trooper. Max power in the Amigo/MU was 96 hp (72 kW), while export market Troopers (carburetted) produced 110 PS (81 kW) and MY 1988/89 US market Isuzu Piazzas received an MPFi version with 110 hp (82 kW) at 5,000 rpm.	89.3 mm	90 mm	2,255 cc		8 Valve SOHC
4ZE1	The 2.6L 4ZE1 engine was available as an option to replace the 4ZD1 on four-wheel-drive models. It was fitted to the MU/Wizard/Rodeo/Amigo, the Trooper, and the Pickup.	92.6 m	95 m	2,559 cc	120 hp (89 kW)	8 Valve SOHC

Diesel

Isuzu B engine

Designation	Description	Bore	Stroke	Displacement	Power Rating	Valvetrain
4BA1	Philippine jeepneys along with the 4BC1 and 4BD1.			cc|cuin	PS|kW 165|Nm|lbft @2200rpm
4BB1	The 4BB1 is a direct injection diesel sold in Isuzu ELF and KT light trucks from 1973 to 1979. It is a four-cylinder version of the 6BB1.	mm|in	mm|in	cc|cuin	to|100|PS|kW @3300-3400rpm 265|Nm|lbft @2000rpm
}4BC1	The 4BC1 is a 3.3L diesel sold in Isuzu ELF light trucks from 1980 to 1982.	mm|in			PS|kW 175|Nm|lbft @2500rpm
4BC2	The 4BC2 is a 3.3 L direct injection version of the 4BC1. It was sold in the Isuzu ELF and NPR trucks from 1982 to 1987.	mm|in			kW|PS @3500rpm 200|Nm|lbft @2000rpm
4BD1	kW|PS|hp @3200rpm, 1988 models had 83|kW|PS|hp @3200rpm 270|Nm|lbft @1900rpm. OEM diesel in Australian specification Land Rover SIII Stage 1 and coil sprung 110, 120, and Land Rover Perentie models from 1981 to 1992. In Batangas, Philippines, it has been used in jeepneys as the "Barako".	mm|in	mm|in	cc|cuin
4BD1T	to|100|kW|PS|hp. Peak torque ranges from 314|to|330|Nm|lbft @1,800rpm. Also used in jeepneys built in Batangas.	mm|in	mm|in	cc|cuin
4BD12T	The 4BD2T is an indirect injection version of the 4BD1T that was also intercooled, it replaced the 4BD1T in the US market until 1998.	mm|in	mm|in	cc|cuin	kW|PS @3000rpm 345|Nm|lbft @2000rpm
4BE1	kW|PS @3800rpm 242|Nm|lbft @2000rpm	mm|in	mm|in	cc|cuin
4BG1	PS|kW|0.	mm|in	mm|in	cc|cuin

Isuzu C engine

Designation	Description	Bore	Stroke	Displacement	Power Rating	Valvetrain
C180	The C180 engine was used in the Isuzu Bellett, Bellett B, Express, and Wasp.	mm|in	mm|in	cc|cuin	PS|kW|0.	8 Valve OHV
C190	Isuzu Journey-S minibus. For later industrial and marine applications, this engine has been called 4AA1. There is also a gasoline-powered iteration of this engine, called the #G201|G 201 FA.	mm|in	mm|in	cc|cuin	PS|kW @4400rpm	8 Valve OHV
C220 C221 C223	Isuzu P'up; GM also used the C220 series as an option (RPO LQ7) with the Chevrolet S10/GMC S15; low demand led to its discontinuation after the 1985 model year where subsequent S-series were gasoline powered. It was also used in the 1979–1981 Isuzu 117 Coupé XD/XDL, one of the first cars with sporting pretensions to be fitted with a diesel engine. In the 117, claimed max power (JIS) increased to 73|PS|kW|0 at 4,300 rpm. It is a bored out version of the 2-litre #DL engine|DL201 and was first seen in the 1964 Isuzu Elf, as the C220 with 62 PS. For the 1968 new model Elf it was upgraded (now with 65 PS) and called the C221.	mm|in	mm|in	cc|cuin		8 Valve OHV
C240	The C240 was often used in stationary and forklift applications. It has been used in the second and third generation Isuzu Elf 250 since late 1969 (TLD23) and also in the rare, front-wheel drive "Elf Mypack" (KUD20). For later industrial and marine applications, this engine has been called 4AB1. This family of Isuzu engines were fitted in early diesel jeepneys and CJ2A, CJ3A jeeps made by Francisco Motors and Sarao Motors in the Philippines.	mm|in		cc|cuin	to|68|hp|PS|kW|0 145|Nm|lbft	8 Valve OHV

Isuzu DL engine

Designation	Description	Bore	Stroke	Displacement	Power Rating	Valvetrain
DL200	The DL200 is a long-stroke 2.0L engine with cast iron block and head. It was fitted to the Isuzu Elf. In 1961 it was replaced by the more modern DL201 engine.	mm|in	mm|in	cc|cuin	PS|kW|0 12|kgm|Nm|lbft	8 Valve OHV
	There is also a 1.6L engine with cast iron block and head. It was fitted to the Isuzu Bellel. The fuel injection was a licensed Bosch unit.	mm|in	mm|in	cc|cuin	PS|kW|0 87|lbft|Nm	8 Valve OHV
DL201	Bellel and Bellel Express as well as the Elf and Elfin trucks. Like its smaller sister, the DL201 used a license-built Bosch fuel injection unit.	mm|in	mm|in	cc|cuin	PS|kW|0 89|kgm|Nm|lbft	8 Valve OHV

Isuzu E engine

This family of engines is of the Indirect injection#Swirl chamber|swirl chamber design.

Designation	Description	Bore	Stroke	Displacement	Power Rating	Valvetrain
4EC1	PS|kW|0 at 4,800 rpm and 90 Nm at 3,000 rpm. The turbocharged version (IHI) develops 67|PS|kW|0 at 4,600 rpm and 132 Nm at 2,600 rpm as fitted to the Opel Corsa#A|Opel Corsa A (with 0.68|bar|psi|1|abbr=on|disp=or}} of boost), and 72|PS|kW|0 at 4,600 rpm and 143 Nm at 2,600 rpm when fitted to the larger Opel Kadett E. This engine was first seen in the Isuzu Gemini#1985|Isuzu Gemini FF.	mm|in	mm|in	cc|cuin		8 Valve SOHC
4EE1	1990 the turbocharged and intercooled version first seen in Isuzu Gemini. This engine formed basis for common rail, fuel injection #Direct injection direct injection Circle L engine 4EE2 engine now produced by Opel	79mm	86 >mm	1686 cc	88 PS@4,500rpm 167 Nm @2,500rpm	8 Valve SOHC
4EE2	This engine is now produced by Opel, who calls it the Ecotec DTi/CDTi. Better known as the "Circle L engine", it is made in Poland by Isuzu Motors Polska and is available in certain Opel and Honda vehicles.	mm|in	mm|in	cc|cuin	PS|kW|0	8 Valve SOHC

Isuzu F engine

Designation	Description	Bore	Stroke	Displacement	Power Rating	Valvetrain
4FB1	Isuzu Gemini/I-Mark as well as the Australian Holden Gemini iteration of that car. It was also available with electronic fuel injection (Bosch) and with a turbocharger. 61|PS|kW|0 @5,000rpm, 11.2|kgm|Nm lbft @2,000rpm (JIS) 66|PS|kW|0 @5,000rpm, 11.2|kgm|Nm lbft @2,000rpm (JIS) - Electronic injection 73|PS|kW|0 @5,000rpm, 16.0|kgm|Nm lbft @2,500rpm (JIS) - Turbocharged	mm|in	mm|in	cc|cuin	hp|PS|kW|0 @5000rpm 72|lbft|Nm	8 Valve SOHC
4FC1	The 4FC1 is a 2.0L engine used in the Isuzu Aska, and in Hindustan Ambassador in turbo and non-turbo (2DE1 NA) form.	mm|in	mm|in	cc|cuin		8 Valve SOHC

Isuzu H engine

Designation	Description	Bore	Stroke	Displacement	Power Rating	Valvetrain
4HE1-T	The 4HE1-T is a direct injection turbocharged engine of 4.75L capacity. Applications include the 1998 Isuzu NQR500.	mm|in	mm|in	cc|cuin	kW|PS|0|abbr=on|order=flip}} @2,900rpm 400|Nm|lbft @1800rpm	OHC
4HE1-XN	The 4HE1-XN is an OHC direct injection turbocharged engine of 4.75L capacity. Applications include the 2003 Isuzu NPR400.	mm|in	mm|in	cc|cuin	kW|PS @2700rpm 458|Nm|lbft @2000-2400rpm	OHC
4HF1	The 4HF1 is an OHC direct injection engine of 4.33L capacity. Applications include the 1998 Isuzu NPR200	mm|in	mm|in	cc|cuin	kW|PS @3200rpm 285|Nm|lbft @1800rpm	OHC
4HG1-T	The 4HG1-T is an OHC direct injection turbocharged engine of 4.57L capacity. Applications include the 2000 Isuzu NPR350A	mm|in			kW|PS @3000rpm 325|Nm|lbft @1800rpm	OHC
4HK1-TCN	turbocharged engine of 5.2L capacity. Applications include the 2006 Isuzu NPR400	mm|in	mm|in	cc|cuin	kW|PS @2600rpm 402|Nm|lbft @1500-2600rpm	16 Valve SOHC
4HK1-TCC	turbocharged engine of 5.2L capacity. Applications include 2008 Isuzu NQR500	mm|in	mm|in	cc|cuin	kW|PS @2600rpm 510|Nm|lbft @1500-2000rpm	16 Valve SOHC
4HK1-TCS	turbocharged engine of 5.2L capacity. Applications include 2005 Isuzu NQR500	mm|in	mm|in	cc|cuin	kW|PS @2600rpm 500|Nm|lbft @1600-2600rpm	16 Valve SOHC
4HJ1	The 4HJ1 is a direct injection OHC engine of 4.99L capacity.	mm|in	mm|in	cc|cuin	kW|PS @3100rpm 363|Nm|lbft @1600rpm	OHC
4HL1	The 4HL1 is a common rail direct injection high-pressure fuel injection system diesel engine of 4.777L capacity with electronic control system.	mm|in	mm|in	cc|cuin	kW|PS @3000rpm 333|Nm|lbft|kgm @1500rpm	16 Valve OHC
4HL1-N	The 4HL1-N is a common rail direct injection high-pressure fuel injection system diesel engine of 4.777L capacity with electronic control system.	mm|in	mm|in	cc|cuin	kW|PS @3000rpm 333|Nm|lbft|kgm @1500rpm	16 Valve OHC
4HL1-TC	turbocharged and intercooled high-pressure fuel injection system diesel engine of 4.777L capacity with electronic control system.	mm|in	mm|in	cc|cuin	kW|PS @2700rpm 425|Nm|lbft|kgm @1500rpm	16 Valve OHC
4HL1-TCS	turbocharged and intercooled high-pressure fuel injection system diesel engine of 4.777L capacity with electronic control system.	mm|in	mm|in	cc|cuin	kW|PS @2700rpm 500|Nm|lbft|kgm @1500rpm	16 Valve OHC

Isuzu J engine

Designation	Description	Bore	Stroke	Displacement	Compression Ratio	Power Rating	Valvetrain
4JA1	Isuzu TF Pickups under a variety of names including Opel Campo, and also in the Thai market Isuzu Wizard#Thailand|Isuzu Cameo(1991-1997Mazda B2500 "Thunder" ; 1992-1996Ford Marathon) and in the Isuzu Panther, an Isuzu MUV car produced in Indonesia.	mm|in	mm|in	cc|cuin
4JA1-L	PS|kW|0 @ 3800 rpm and 170|Nm|lbft @1800rpm. For the Indonesian market it is rated at 80|PS|kW @3500rpm and 191|Nm|lbft @1800rpm and is installed in the Isuzu Bison, a relabelled Mitsubishi Delica (L300), the old Isuzu Pickup, and the Isuzu Panther. For the Philippines it is rated at 85|PS|kW @3900rpm and 185|Nm|lbft @2000rpm and is used in the Euro2 Isuzu Crosswind, the local version of the Panther; and in India at 73.4|PS|kW @3900rpm and 171|Nm|lbft @1800rpm for the BS-3 (Euro3 equivalent) Chevrolet Tavera (another version of the Panther).
4JA1-T	The 4JA1-T is a 2.5L direct injection engine.	mm|in	mm|in	cc|cuin
4JB1	kg|lb. It was used in the Isuzu Bighorn (Trooper), Mu (Rodeo), Wizard (LWB Rodeo), Rodeo Pickup and Holden Jackaroo sold in most world markets aside from North America until the early 1990s. This motor was also installed in Isuzu Elf and other light trucks.	mm|in	mm|in	cc|cuin		87 PS	OHV
4JB1-T	The 4JB1-T is a turbocharged version of the 4JB1. It was intercooled in some applications. Numerous versions of the Isuzu 4JB1 remain in production in China, both by Isuzu's Chinese joint ventures and innumerable other manufacturers like YANGZI. Upgrades to common-rail direct injection to bring emissions up to National 4 standards and even 16V DOHC valve-trains are also in production.	mm|in	mm|in	cc|cuin		and|115|PS|kW
4JK1-TC	The 4JK1-TC is a common-rail direct injection intercooled turbo-diesel engine. It was used in the Isuzu D-Max and first generation Chevrolet Colorado produced in Thailand.	mm|in	mm|in	cc|cuin		kW|PS 208|Nm|lbft|kgm @1800-2200rpm	16 Valve DOHC
4JK1-TC Hi Power	The 4JK1-TC Hi Power is an in line direct injection electronic common rail diesel engine with a variable geometry(VGA) turbocharger and compression ratio originally at 18.1:1. It was used in the Isuzu D-Max, produced in Thailand, and the related Holden Rodeo and first-generation Chevrolet Colorado. The original version is still used in the South African version of the new D-Max, the Isuzu KB, and with the compression ratio reduced to 16.0:1 in the Thai-market D-Max X-series.	mm|in	mm|in	cc|cuin		PS|kW 320|Nm|lbft @1800-2800rpm	16 Valve DOHC
4JK-1E5-TC	The 4JK-1E5-TC is a twin turbo version of the 4JK1 and was produced for DMAX pickups exported to Europe startin in 2012. Certified to the Euro5b emission standard with a 17.0:1 compression ratio.	mm|in	mm|in	cc|cuin		kW|PS @3600rpm 400|Nm|lbft|kgm @1400-2000rpm
4JG1	The 4JG1 engine has a trochoid type oil pump, gear driven from the camshaft. The fuel system operates by plunger and nozzle and is of the high pressure solid injection type (Zexel in-line Bosch A-type). The starter motor is a 12 V unit. The firing order 1-3-4-2.				18.6	kW|PS @2500rpm 205|Nm|lbft|kgm	OHV
4JG1T	The 4JG1T engine is a turbocharged version of the 4JG1. Notable differences include a reduced compression ratio of 18.1:1				18.1	kW|PS @2500rpm 265|Nm|lbft|kgm	OHV
4JG2	Isuzu Bighorn (Trooper II) and Mu/Wizard (Rodeo) in most markets. This engine was upgraded from mechanical injection to electronically controlled mechanical injection.	mm|in	mm|in	cc|cuin		to|84|kW|PS
4JH1-T	Faster/Rodeo pickups. This vehicle was sold as the Holden Rodeo in New Zealand and Australia. On some models it features an electronically controlled injection pump.					kW|PS 245|Nm|lbft|kgm	OHV
4JJ1-TC	The 4JJ1-TC is a 3.0L common rail direct injection engine with turbo and intercooler which replaced the 4JH1 in the Holden Rodeo and later Chevrolet & Holden Colorado produced in Thailand. It has a 17.5:1 compression ratio.	mm|in	mm|in				16 Valve DOHC
4JJ1-TCX	PS|kW and 360|Nm|lbft for Manual transmission/ 333|Nm|lbft for Automatic transmission, increased to 177|PS|kW and 380|Nm|lbft in 2011 with a reduction in compression ratio to 17.3:1. With the introduction of Isuzu's "BluePower" system for improved economy in 2015, the compression ratio was further reduced to 16.5:1 both for the facelifted "Blue Power" D-Max and the Mu-X.	mm|in	mm|in				16 Valve DOHC
4JX1	The 4JX1 is a 3.0L direct injection diesel engine, turbo, some intercooled, which replaced the 4JG2 in the Isuzu Bighorn/Trooper/Holden Jackaroo. It uses unit injectors and 4 valves per cylinder.

Isuzu RZ Engine

• The Mal:Vanchor is a 1.9L direct injection diesel powered, turbo intercooled engine which replaced the 4JK1-TCX in Isuzu D-Max. This new engine is 1898cc and is therefore 601cc smaller in displacement than the 4JK1-TCX. In power wise, RZ4E-TC generate 150HP at 3600rpm and flat torque of 350NM between 1800rpm to 2600rpm make it 16HP and 30NM more than 4JK1-TCX. In addition, Isuzu announced that RZ4E-TC will have 19% more fuel efficiency compare to its predecessor. Bore is 80.0 mm and stroke is 94.4 mm.

CNG

CNG Engines

Isuzu developed the first Compressed Natural Gas (CNG) engine series with low-emissions truck mounted with a clean CNG engine emitting zero black smoke.

• The 4HF1-CNG is a CNG engine of 4.334 L capacity (as based on direct injection diesel engine) with non-contact ignition system. Peak torque is 323 Nm, peak power is 88|kW|PS|0|abbr=on|order=flip}} at 1,500 rpm. Bore is 115 mm, stroke is 108 mm.
• The 4HV1 is a CNG engine of 4.570 L capacity with non-contact ignition system. Peak torque is 353 Nm, peak power is 12.5|kW|PS|0|abbr=on|order=flip}} at 3200 rpm. Bore is 115 mm, stroke is 110 mm. Application used for NPR300 CNG series.

Five Cylinder

Gasoline

The Isuzu i-Series utilizes General Motors-built inline five-cylinder engines.

• 2004–2006 used the General Motors-built Vortec 3500 Engine with 220 hp (164 kW) and 225 ft·lb (305 N·m) of torque.
• 2007–2008 use the General Motors-built Vortec 3700 Engine with 242 hp (180 kW) and 242 ft·lb (327 N·m) of torque.

Six Cylinder

Gasoline

General Motors

• From 1989 to 1990 the 2838 cc LL2 V6 with single point fuel injection, producing 122 hp and 204 Nm of torque was used in the first generation Isuzu Trooper.
• From 1990 to 1992 the 3128 cc LG6 V6 engine with 122|hp|kW|0 and 224|Nm|lb.ft|0 was used in the Isuzu Rodeo until replaced with the Isuzu-built 3.2L 6VD1 engine.
• 2002–2009 SUV use the General Motors-built Atlas 4200 Engine with 275 hp (205 kW) and 275 ft·lbf (373 N·m) of torque. For the 2007 model year, the GMT360 platform received an increase to 291 hp (217 kW) and 277 ft·lb (376 N·m) of torque.
• The 1996–2000 Isuzu Hombre used the General Motors-built Vortec 4300 Engine with 180 hp (134 kW) and 245 ft·lb (332 N·m) of torque.

Isuzu V engine

The Isuzu V engine is a family of all-aluminum 75° V6 gasoline engines ranging from 3.2 to 3.5 liters.

Diesel

• The D400 is an OHV inline-six diesel engine of 3988 cc displacement. It has 102|PS|kW|0 at 3400 rpm and 25.0|kgm|Nm lbft at 1800 rpm. It was first seen in 1968, in the TY-series truck.
• The DA640 is an inline-six, four-stroke diesel engine of 6373 cc displacement. It has 135|PS|kW|0 at 2600 rpm and 41.5|kgm|Nm lbft at 1600 rpm.
• The 6DE1 DMAX V6 engine is a DOHC 24V turbocharger|turbocharged engine with 184|PS|kW|0 and 400|Nm|lb.ft|-1 of torque as found in the Euro IV specification Vauxhall Vectra.

Bore x Stroke: 87.5 mm x 82 mm Displacement: 2958|cc|L cuin|

• The 6BB1 is a 6-cylinder version of the 4BB1 and displaces 5393 cc.
• The 6BD1 and 6BD1T are six-cylinder versions of the 4BD1/4BD1T and displace 5785 cc.

File:Isuzu 6UZ1-TCG40 380PS.jpg|thumb|upright|380 PS 6UZ1-TCG40 diesel engine

• The 6BG1 and 6BG1T are 6-cylinder version of the 4BG1T and displaces 6490cc.
• The Isuzu 6H Engine|6HK1 is a SOHC 24V turbocharger|turbocharged engine with 200-300 HP (149-224 KW) and 700|-|1160|Nm|lb.ft|-1 of torque.

Bore x stroke: 114.8 mm x 125 mm, displacement: 7785|cc|L|1|abbr=on|order=flip}}

• The 6QA2 is used for heavy duty buses.
• The 6UZ1 is a 9839|cc|L|1|abbr=on|order=flip}} inline six-cylinder diesel engine, used in trucks and buses.
• The DH100 is an inline-six, four-stroke diesel engine of 10,179 cc displacement. It has 195|PS|kW|0 at 2300 rpm and 69.0|kgm|Nm lbft at 1200 rpm.
• The 6WG1-TCS is a 15.2 liter inline six-cylinder diesel engine with 480-520 hp, it is used in Isuzu Giga|Isuzu GigaMAX truck.
• The E120 is a 12023|cc|L|1|abbr=on|order=flip}} inline six-cylinder diesel engine, used in heavier-duty dumper trucks and similar. It has 260|PS|kW|0 at 2500 rpm and 84.0|kgm|Nm lbft at 1400 rpm.

Eight Cylinder

Gasoline

• 2001–2009 General Motors SUV's use the General Motors-built GM Vortec engine with 285 hp (213 kW) and 325 ft·lb (441 N·m) of torque.
• Isuzu Commercial trucks use the General Motors-built GM Vortec engine with 300 hp (224 kW) and 360 ft·lb (488 N·m) of torque.

Diesel

• The 8PA1 is a 9971 cc| V8 diesel truck engine. It has 215|PS|kW|0 at 2800 rpm and 62.0|kgm|Nm lbft at 1600 rpm.
• Isuzu co-designed and built some of the Duramax V8 engine along with General Motors from 2001-2010.

References

• [1980–2004 Isuzu Shop Manuals]
• Official Website -Isuzu Commercial Vehicles