Mercedes-Benz M950F

Fra MotorWiki
Hopp til navigering Hopp til søk

Wankelmotor fra slutten av 60tallet. Totalt ble det bygget 12 motorer.

Daimler-Benz
DB M950F.jpg
Damler-Benz M950F
1969 - 1970
Bensin
Motor M950F
Variant Wankel
Vekt tørr Kg
Byggeår 1969 - 1970
Ytelse 350 Hk @ 7000 o/min
Dreiemoment Nm @ o/min
Innsprøytning
Sylindre 3/4 Rotor
Slagvolum 600 ccm pr rotor
Borring mm
Slag mm
Kompresjon
Turbo Kompressor
Ladeluftkjøler Nei
Kjøling Vann
Dieselpumpe -
Dysespiss -
Dieselfilter -
Oljefilter -
Stempelhastighet - m/s
Stempelprodusent -
Startmotor -

Engine type M 950 F Number of cylinders / arrangement three-rotor Wankel engine Total displacement chamber volume 3 x 600 cc Compression ratio 9.3 Rated output 280 hp / 206 kW at 7000 rpm Rated torque 294Nm at 4000 - 5500 rpm Fuel system direct injection, mechanically controlled; Bosch 3-plunger injection pump Cooling water cooling / pump; radiator in the car's front Lubrication pressure circulation lubrication Electric system 12 V Generator three-phase AC Starter electrical Ignition transistor ignition Fuel tank: position / capacity in the lateral frame side rails / 2 x 60 litre Fuel supply piston pump as part of the injection pump


C 111 Specifications (First Version) Combustion principle Wankel Configuration in front of rear axle (mid engine) Engine type M 950 F Number of cylinders / arrangement three-rotor Wankel engine Total displacement chamber volume 3 x 600 cc Compression ratio 9.3 Rated output 280 hp / 206 kW at 7000 rpm Rated torque 294Nm at 4000 - 5500 rpm Fuel system direct injection, mechanically controlled; Bosch 3-plunger injection pump Cooling water cooling / pump; radiator in the car's front Lubrication pressure circulation lubrication Electric system 12 V Generator three-phase AC Starter electrical Ignition transistor ignition Fuel tank: position / capacity in the lateral frame side rails / 2 x 60 litre Fuel supply piston pump as part of the injection pump Gearing 5-speed manual transmission ZF 5 DS-25/1 Shifting central floor gear shift lever Clutch dry single-disc clutch Synchromesh gears I - V Final drive ratio 3.166 Maximum speed 260 km/h Acceleration 0-100 km/h 5 sec (2 occupants)

-- C 111 Specifications (Second Version) Combustion principle Wankel Configuration in front of rear axle (mid engine) Engine type M 950 F Number of cylinders / arrangement four-rotor Wankel engine Total displacement chamber volume 4 x 600 cc Compression ratio 9.3 Rated output 350 hp / 257 kW at 7000 rpm Rated torque 392Nm at 4000 - 5500 rpm Fuel system direct injection, mechanically controlled; Bosch 4-plunger injection pump Cooling water cooling / pump; radiator in the car's front Lubrication pressure circulation lubrication Electric system 12 V Generator three-phase AC Starter electrical Ignition transistor ignition Fuel tank: position / capacity in the lateral frame side rails / 2 x 60 litre Fuel supply piston pump as part of the injection pump Gearing 5-speed manual transmission ZF 5 DS-25/1 Shifting central floor gear shift lever Clutch dry double-disc clutch Syncromesh gears I - V Final drive ratio 2.975 Maximum speed 300 km/h Acceleration 0-100 km/h 4.8 secs (2 occupants) --


The extremely rare (12 total built) Mercedes-Benz M950F was a normally aspirated Wankel engine mounted in experimental Mercedes-Benz C111 vehicles, built in 1969-70. There were two versions: 3-rotor engine (600 cc each) with power output of 280 hp at 7000/min, and a later version 4-rotor engine (600 cc each) with power output of 350 hp at 7000/min.

The experimental Mercedes-Benz C111 containing the (code named M950F) engine was shown to the public at the 1969 Frankfurt International Motor Show.

This was a totally experimental car from Daimler-Benz, and they gave up on the rotary due mainly to poor fuel consumption.


C 111 Specifications (First Version) Combustion principle Wankel Configuration in front of rear axle (mid engine) Engine type M 950 F Number of cylinders / arrangement three-rotor Wankel engine Total displacement chamber volume 3 x 600 cc Compression ratio 9.3 Rated output 280 hp / 206 kW at 7000 rpm Rated torque 294Nm at 4000 - 5500 rpm Fuel system direct injection, mechanically controlled; Bosch 3-plunger injection pump Cooling water cooling / pump; radiator in the car's front Lubrication pressure circulation lubrication Electric system 12 V Generator three-phase AC Starter electrical Ignition transistor ignition Fuel tank: position / capacity in the lateral frame side rails / 2 x 60 litre Fuel supply piston pump as part of the injection pump Gearing 5-speed manual transmission ZF 5 DS-25/1 Shifting central floor gear shift lever Clutch dry single-disc clutch Synchromesh gears I - V Final drive ratio 3.166 Maximum speed 260 km/h Acceleration 0-100 km/h 5 sec (2 occupants)



C 111 Specifications (Second Version) Combustion principle Wankel Configuration in front of rear axle (mid engine) Engine type M 950 F Number of cylinders / arrangement four-rotor Wankel engine Total displacement chamber volume 4 x 600 cc Compression ratio 9.3 Rated output 350 hp / 257 kW at 7000 rpm Rated torque 392Nm at 4000 - 5500 rpm Fuel system direct injection, mechanically controlled; Bosch 4-plunger injection pump Cooling water cooling / pump; radiator in the car's front Lubrication pressure circulation lubrication Electric system 12 V Generator three-phase AC Starter electrical Ignition transistor ignition Fuel tank: position / capacity in the lateral frame side rails / 2 x 60 litre Fuel supply piston pump as part of the injection pump Gearing 5-speed manual transmission ZF 5 DS-25/1 Shifting central floor gear shift lever Clutch dry double-disc clutch Syncromesh gears I - V Final drive ratio 2.975 Maximum speed 300 km/h Acceleration 0-100 km/h 4.8 secs (2 occupants)