Søkeresultater

Hopp til navigering Hopp til søk
  • type =8-cylinder Vee water-cooled piston engine The '''Benz Bz.IIIb''' was an eight-cylinder, [[water cooling|water-cooled]], V-engine developed in Germany for use in aircraft in [[1918 in av
    1 KB (188 ord) - 10. sep. 2023 kl. 20:21
  • …with scavenging air fan, starter pump, cooling water pump, oil and piston cooling pump. 
    1 KB (207 ord) - 24. jan. 2018 kl. 18:32
  • Cooling water cooling / pump; radiator in the car's front Cooling water cooling / pump; radiator in the car's front
    8 KB (1 015 ord) - 8. apr. 2023 kl. 14:14
  • | Cooling:  || align="center" |Water
    3 KB (379 ord) - 13. des. 2018 kl. 19:31
  • Cooling system: Water-cooled
    3 KB (351 ord) - 2. mai 2016 kl. 12:47
  • …the Porz district of [[Cologne]] and as of 2004 was manufacturing [[Engine cooling|liquid and air-cooled]] [[diesel engine]]s. The larger engines in the Deutz …are available in the power range 4 to 500 kW, with air, oil or water cooling and with life expectancy of 20,000 and 30,000 running hours TBO (Time Betwe
    5 KB (771 ord) - 16. sep. 2017 kl. 18:18
  • …esel, a transversely mounted Renk HSWL 295 TM automatic transmission and a cooling and air filtration system. …h a sequential turbocharger to ensure good operational performance both on water and on land. The basic engine has not been changed for the AAAV application
    6 KB (870 ord) - 27. apr. 2015 kl. 13:35
  • …well known Daimler aero engines. A key identifier (from the D IIIa) is the water pumps position midway up the vertical drive shaft at the rear of the engine …into an aluminum crankcase did not exist at that time. Jackets for cooling water covered the top 2/3 of the cylinder, feeding a radiator via connections at
    13 KB (2 149 ord) - 10. jul. 2015 kl. 15:31
  • …naval craft. The engine, with a mechanically driven blower and charge air cooling, rendered an output of 2500 hp (metric) at 1720 rpm. MTU Friedrichshafen is …mounted in the vessel on a common frame. Pressure oil pumps, fresh and sea water pumps, fuel delivery pumps, filters, heat exchangers and oil containers of
    5 KB (696 ord) - 2. des. 2023 kl. 13:47
  • …ontal design was chosen. The bearings and exhaust parts of the turbine are water cooled. The turbine is positioned exactly above the center of the engine to …intake on the control shaft, a good flushing of the combustion chamber and cooling of the piston crown and the outlet valves is achieved. Likewise, there is…
    31 KB (4 924 ord) - 20. sep. 2023 kl. 18:21
  • The cooling water pump is located on the engine side of the engine. -
    10 KB (1 285 ord) - 11. okt. 2023 kl. 15:46
  • …hainsaw]]s, auxiliary power units, loitering munitions, aircraft, personal water craft jet skis, snowmobiles, and range extenders in cars. In the past, the …more practical engine, as it has easily accessible spark plugs, a simpler cooling design, and a conventional power take-off shaft.<ref name="Hege 2015 p. 54"
    124 KB (17 939 ord) - 8. apr. 2023 kl. 14:26
  • 229 from 01.08.1980 to 31.10.1993 AUXILIARY HOT WATER HEATER IN THE REAR 266 from 01.02.1968 to 31.01.1969 CRANKCASE VENTILATION WITH WATER SEPARATOR
    321 KB (25 063 ord) - 11. jan. 2018 kl. 12:47
  • …s belt drive with gearchange (Patent DRP 68492, 70577, 75069) and flywheel cooling (Patent DRP 70260). The patents are granted between May 1893 and May 1894… …ed", and the vehicle has a lighter engine and lower consumption of cooling water than its 1900/01 predecessors.
    184 KB (27 434 ord) - 28. feb. 2022 kl. 20:56